cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1524
Views
0
Helpful
2
Replies

Add custom mib to Prime 3.0

davy.timmermans
Level 4
Level 4

I would like to know when the secondary WLC in the HA cluster is active. This should be possible via CISCO-LWAPP-HA-MIB

To achieve this I've downloaded Standard-MIBS-Cisco_8.1 and MIBS_8.1 from the controller software page.

My problem is that I'm not able to upload any of the MIB (zip/individual mib) to prime>monitor tools/monitoring policies> custom mib polling:upload mib

--> reference error, unexpected token. I'm not able to read the full error message.

1 Accepted Solution

Accepted Solutions

dkeysell
Cisco Employee
Cisco Employee

I believe you need to import CISCO-RF-MIB before importing CISCO-LWAPP-HA-MIB.

View solution in original post

2 Replies 2

dkeysell
Cisco Employee
Cisco Employee

I believe you need to import CISCO-RF-MIB before importing CISCO-LWAPP-HA-MIB.

upload worked.

Unfortunately the output when using these objects in prime are not 100% satisfying.

> clHAsecondarycontrollerusage should give back an integer --> but it doesn't return anything 

>clHAPrimaryUnit --> returns 1 or 2 - should be true/false --> I'd hoped to send a trap eg. when false 

see attached result

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: