Add custom mib to Prime 3.0

[davy.timmermans]

I would like to know when the secondary WLC in the HA cluster is active. This should be possible via CISCO-LWAPP-HA-MIB

To achieve this I've downloaded Standard-MIBS-Cisco_8.1 and MIBS_8.1 from the controller software page.

My problem is that I'm not able to upload any of the MIB (zip/individual mib) to prime>monitor tools/monitoring policies> custom mib polling:upload mib

--> reference error, unexpected token. I'm not able to read the full error message.

[dkeysell · Accepted solution]

I believe you need to import CISCO-RF-MIB before importing CISCO-LWAPP-HA-MIB.

[davy.timmermans]

upload worked.

Unfortunately the output when using these objects in prime are not 100% satisfying.

> clHAsecondarycontrollerusage should give back an integer --> but it doesn't return anything 

>clHAPrimaryUnit --> returns 1 or 2 - should be true/false --> I'd hoped to send a trap eg. when false 

see attached result