09-20-2006 08:36 AM
Hi,
Does anyone know how the alias command of a pix can be implemented on a router?
Thanks
09-20-2006 09:13 AM
try and use the 'NAT outside' command(s).
this is what has replaced the PIX 'alias' command functionality for the PIX so this sounds like it should work with IOS.
(haven't tried it but logically it sounds doable)
please see the following link for more info on the PIX alias command replacement:
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094aee.shtml
please see the following links for more info on IOS NAT outside:
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_configuration_example09186a0080093f2f.shtml
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_configuration_example09186a0080093f8e.shtml
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community