05-01-2006 10:58 PM
We have recently upgraded our 9500 sw to 2.1.2b and since this, we have been receiving ambiguous snmp traps.
Is there an update i can load into our openview server that will correctly interpret these messages.
Grateful for any help
Jason
05-02-2006 05:14 AM
What is the OID of the trap you are receiving?
05-03-2006 05:25 AM
iso . org . dod . internet . experimental . 94 . 6
hope this helps
05-02-2006 05:48 AM
Once you figure out which MIB the trap is coming from (may need to use the Cisco MIB Navigator: http://www.cisco/com/go/mib), go on to cisco's web site (as described here: http://www.cisco.com/en/US/products/ps5989/products_mib_quick_reference09186a0080216184.html#wp42357
) to download the updated MIB definition.
Install it onto your OpenView NNM server. That should fix up your NNM server's MIB parsing.
Hope this helps, please rate helpful posts.
05-03-2006 05:28 AM
iso . org . dod . internet . experimental . 94 . 6
The MIB also seems to be ambiguous. Can't find this anywhere on the searches.
05-03-2006 05:37 AM
I've seen that sometimes the OID actually show in the NMS is not what was sent.
Do you have a packet capture showing the raw trap that you can look at and drill down to see the actual OID?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide