ASA Site2Site VPN tunnel

jegbuanran · ‎11-09-2019

I am trying to create in my ASA 5525X a Site to Site VPN tunnel between SiteA (my office) and SiteB (another company office). And to creat ACL and NAT tfor the traffic from SiteA to SiteB.

so that users in SiteA can access multiple server in SiteB.

SiteA external IP is 96.72.154.64

SiteA inernal IP is 10.10.1.0

SiteA Vpn client Ip is 172.16.1.1

SiteB external IP is 180.98.91.10

inside resoucres IP are ;

180.98.21.2

10.1.5.10 to 10.1.5.10

ANY HELP WOULD GREATLY APPRECIATED

balaji.bandi · ‎11-09-2019

here is the good config and step by step document site to site tunnel :

https://motaroirhaby.blogspot.com/2014/03/site-to-site-vpn-tunnel-cisco-asa-842.html

https://www.networkstraining.com/configuring-site-to-site-ipsec-vpn-on-asa-using-ikev2/

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Afolarin Omole · ‎11-12-2019

@jegbuanran

Please can you be clear in terms of what you want to achieve . Is this a s2s VPN or RA VPN because I can see you mentioning vpn client ip address.

so what access you want to achieve ( I mean the encryption domain ) , you need to let us know which subnet is site A internal and to what subnet on site B etc.

The stated vpn client in your message is confusing . once this is made clear , then you will have configuration template on here.

cheers

jegbuanran · ‎11-12-2019

Thank you for your response.
I am trying to configure Site to Site VPN tunnel (not Remote Access VPN).
My office (SiteA) external interface IP is 96.72.154.64 and internal interface (local/subnet) IP is 10.10.1.0

The remote or peer (siteB) external IP is 180.98.90.10 and their subnet IP (their internal resource that I want to access) 180.98.21.2

Again, thank you.