Hello,
We have a 4506 switch that when I boot it up goes directly to Rommon. But I am getting an error:
******** The system will autoboot now ********
config-register = 0x2102
Autobooting using BOOT variable specified file.....
Current BOOT file is --- cat4500-ipbasek9-mz.122-53.SG.bin
Invalid filename cat4500-ipbasek9-mz.122-53.SG.bin. It must begin with device name.
Here is the out put of the dir command:
Switch#dir
Directory of bootflash:/
5 -rwx 16169468 Feb 11 2000 08:16:10 +00:00 cat4500-ipbasek9-mz.122-53.SG.bin
Here is the boot coammnds from the running-config:
boot-start-marker
boot system flash cat4500-ipbasek9-mz.122-53.SG.bin
boot-end-marker
!
I want the switch to boot from the image file but I am doing something wrong.
Any help very much appreciated,
Pedro
