Boot from PCMCIA

[vanagon2tdi]

Does anyone know how to setup my 3660 to boot from the IOS loaded on the PCMCIA card? Currently when I reboot the router it comes up in ROMON mode and I have to enter the command: boot slot0:

Thanks!

Dave

[vanagon2tdi]

Should have spent more time searching.

Had the configure-register set wrong.

D

[locp]

Hello, Dave

From ROMMON, confreg will let you change the boot from RM ( 0 ) to 2, that will get you start.

Make sure you can see the flash= dir slot0:

What pcmcia flash model/size do you have ?

HTH,

lP