02-27-2012 08:19 AM
Hi,
We're preparing to upgrade a Cisco catalyst 4507 how can I be sure which type I exactly have
C4507R
C4507R-E
C4507R+E
?
sh ver shows :
cisco WS-C4507R (MPC8245) processor (revision 10) with 262144K bytes of memory.
but we have modules WS-X4548-GB-RJ45
Any help much appreciated.
Regards
Steven
02-27-2012 09:19 AM
1 2 Supervisor II+ 1000BaseX (GBIC) WS-X4013+
2 2 Supervisor II+ 1000BaseX (GBIC) WS-X4013+
3 48 10/100/1000BaseT (RJ45) WS-X4548-GB-RJ45
4 48 10/100/1000BaseT (RJ45) WS-X4548-GB-RJ45
7 48 10/100/1000BaseT (RJ45) WS-X4548-GB-RJ45
should I install
12.2(54)SG
or what is the recomended version?
02-27-2012 01:46 PM
"sh inventory" and the first line will show you what kind of chassis you've got.
02-28-2012 12:12 AM
I had allready forgotten all about that command.
Should I install the latest available IOS
12.2(54)SG
I have a
PID: WS-C4507R
with two supervisors2+
02-28-2012 12:39 AM
Should work. Your line cards don't have the "E".
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide