C9200 SNMP Interface status "err-disabled"

[gehsu]

I use snmpwalk to get the OID list, there are no OIDs starting with 1.3.6.1.4.1.9.548 (err-disabled) and 1.3.6.1.4.1.9.9.315 (PortSecurityStatus), do I need to adjust any settings?

Or is the C9200 not err-disabled, but PortSecurity In addition

if you turn on PortSecurity, do you need to bind a PC Mac address? Can I not restrict Mac address?

I mainly want to know the err-disabled or PortSecurityStatus status through the monitoring system

[marce1000]

 - Check this thread : https://community.cisco.com/t5/network-management/interface-status-quot-err-disabled-quot-and-snmp/td-p/2319057

 M.

[Georg Pauwen]

Hello,

which MIBs are you using ? I have looked around, it looks like you need the CISCO-PORT-SECURITY-MIB.

https://oidref.com/1.3.6.1.4.1.9.9.315

http://oid-info.com/get/1.3.6.1.4.1.9.9.548

[gehsu]

I used the Getif tool to query the C9200L and didn't see the CISCO-PORT-SECURITY-MIB/err-disabled MIB because I wanted to monitor through Zabbix

IS IT BECAUSE THE PORT-SECURITY FEATURE IS NOT TURNED ON?

If you want to enable it, do you need to bind a MAC or can you choose not to bind it?

[MHM Cisco World]

MIB Locator <<- check this 
select platform and IOS XE ver.