12-31-2009 07:44 AM
Hi,
I have several clusters defined, all switches (commanders and members) are in the DCR with their own IP address and are managed by RME and DFM as standalone hosts.
In Campus Manager, only the commanders are shown, I've tried to put the members in the "Include devices" list, but they're still in 'not managed' state.
any idea is welcome, I'm running LMS3.2, CM5.2.0 on Win2003
Stéph
Solved! Go to Solution.
01-01-2010 09:14 AM
With this property set to ON, Campus will try and auto-detect cluster properties. Set it to OFF, then reinitialize the topology portion of the ANI database. Then run a new Campus Data Collection. To reinitialize the topology portion of the ANI database run:
NMSROOT/bin/perl NMSROOT/campus/bin/reinitdb.pl
12-31-2009 12:08 PM
What is the value of Discovery.Cluster in NMSROOT/campus/etc/cwsi/ANIServer.properties?
01-01-2010 08:26 AM
#To enable or disable Cluster discovery
Discovery.Cluster=ON
01-01-2010 09:14 AM
With this property set to ON, Campus will try and auto-detect cluster properties. Set it to OFF, then reinitialize the topology portion of the ANI database. Then run a new Campus Data Collection. To reinitialize the topology portion of the ANI database run:
NMSROOT/bin/perl NMSROOT/campus/bin/reinitdb.pl
01-01-2010 09:43 AM
Works fine
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide