cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1980
Views
5
Helpful
8
Replies

can somebody help me ? vlan 10,20,30 perfectly getting IP´s from

Roman Mihal
Level 1
Level 1

vlan 10,20,30 perfectly getting IP´s from server but other vlan´s ain´t can somebody please check it and try to fix it ? everything is correctly configured I guess :} 

1 Accepted Solution

Accepted Solutions

Hallo,

 

I have added the HSRP configuration to all remaining Vlans, find attached the revised file (saved in PT version 8.1).

View solution in original post

8 Replies 8

Hi

 Can´t open your file but let me ask you a feel things.  About those others vlans:  Did you created then in the switch or switches ?

If there are trunks, did you allow then on trunks?  What is the exit of the command :

show spann vlan XXXX ?

Hello,

 

the problem is that you don't have HSRP configured for Vlans 40, 50, and 60. The default gateway for .e.g. Vlan 60 on the DHCP server is set to 192.168.1.65, that IP address does not exist anywhere. Is that design on purpose, half of the Vlans with HSRP, the other half not ?

where did you find the 192.168.1.65 ip? HSRP is not configured because i found this problem and i was trying to fix it so maybe it is a problem i ll try to configure it on other vlans . thank you

 

Hello,

 

do you need HSRP configured on Vlan 40, 50, and 60 as well ?

yes i do , can i send you a IP chart and can u try to do it please ? because im done . i dont have enough nerves for it

Hallo,

 

I have added the HSRP configuration to all remaining Vlans, find attached the revised file (saved in PT version 8.1).

I just have any words . I appreciate it so much . thank you

 
 
 

Hello,

 

no problem. This stuff can get confusing sometimes...