Cannot add/import AP350 to Cisco SNMS RME inventory

[fopravil]

I am playing with the Cisco SNMS 1.5 before its installation at the customer.

I am not able add or import from WUG the AP350, running IOS Version 12.2(15)XR; RSE contacts the AP350, gets some SNMP data, but the AP seems to be overloaded during this process (fails to respond to PING-s from WUG monitoring), and the RSE fails to import it with status: Device not responding.

I have got a packet trace (using netmonitor) showing that the AP350 responds to the RSE, but I am not able to find out, where are its responses incorrect.

Does anybody share similar experience?

[pvanvuuren]

I had a similar problem with LMS2.2 in RME.

I installed the latest IDU's for RME, but I think what really made the difference is the following:

1. Increase the SNMP timeouts and retries to something like 300 seconds.

2. Enable services - small-services TCP and UPD too on the AP's

3. Add "snmp-server view iso iso included" to the AP

hope it helps

P

[fopravil]

Hi,

thank you for help - I just increased slow SNMP timeout from 20 to 60s and it worked.