HelloDoes it possible create on RME a customized devices list (CSV) with following data:- Devicename- Chassis- Modules- Serial numbersfor router, switches, IOS Switches?I have tried with RME / Inventory / Detailed Device List (max 50 devices!) but th...
Hello!I want to receive alarms by SNMP from interface when its utilization is reached 80%.Somebody can help me to understand how to configure Cisco?BR,Vadim
our site disable ' ip http server " , because it has a security problemWe bought a ciscoworks (LMS) at these day.I saw a document about CMSIf I use a CMS, we must enable "ip http server".Is it a correct?. We must eanble if we want to use it?Please an...
what is the important configuration?am i configure below that?cdp enable in all cisco device.only cdp enable in device, is a possible to discovery a device?I have a 6509, and 5509 backbone switch.which is prefer seed device 6509 and 5509?help me.
Hi,According to the Process status, ANI server is started, BUT when you click to analyze ANI server, we get the following error:AniWrapper>>analyze(SYSTEM) Server Named: ANIServer4.2-alfcwXXX on port: 14004Nothing has been done on that server. When i...
I installed the lan management soluction packagethe install process has no problem.Is it working properly a CMS without 'ip http server'?when I searched the cisco document in the web-sitethe answered "ip http authentiation" "enable" "local""tacacs"If...
Hi,I have deployed a CWK2000-LMS in my network.But I found that I couldn't saw neither my WS-X6582-2PA installed in 7609 or multi-ppp links of my network in my CWK2000 platform. Could you give me some solutions? Thanks a lot.Sincerely
Hi everybody,I’m looking for an OID for a Catalyst 4506 which shows the index of an interface by input of slot- and portnumber.For example at a Cat65xx (IOS) I can work like this:GET portIfIndex.Slot.Port -> Interface-Index (portIfIndex. = 1.3.6.1.4...
HelloWe are trying to use CWVMS 2.2 to manage a 515 pix firewall.The firewall have already been configured using the CLI, and have http server enabled.Trying the command https://firewalladdress/exec/show%20config from the CWVMS server is ok.When tryi...
DearsHow can i monitor the WAN traffic (POS) with the NAM. I have done all the required configuration in the manual, Cat6500# configure terminal Enter configuration commands, one per line. End with CNTL/Z.Cat6509(config)# access-list 100 permit ip a...
In the User Tracking, the PortName field is all empty. How do I get it to show up automatically picking from with the CiscoView Label or directly from set port name on the Switch?Thanks
I added new package devices in my ciscoworks installation because it doesn't recognize some new switches that we have acquired recently.After my update, I can see the switches with ciscoview but I can not see them in topology services. What can I do...
I just installed CiscoView Device Mgr 1.0 on a new Cat 6509 switch with a single Sup 2 running Native 12.1(22)E2 IOS. I followed the installation instructions copying the tar files and extracting them to the bootflash:. I extracted the CVDM file fi...
Every day at 1:00am the Cisco works server stops recieving syslog data from my devices.In the sysloganalyzer.log files it shows the following.SyslogAnalyzer- Wed Dec 15 16:33:29 MST 2004 5 *sendSlgMessage,Unknown error sending msg to SAR: java.lang.O...
