02-18-2011 01:25 AM
Hi,
we have LMS 3.2 over Windows and there are some WS-C2980G-A in the network which LMS cannot fetch their configs. If we launch a Check Device Credentials job, the result is Ok for SNMP and telnet password but "Username Credential missing. Enable username credential missing" for enable telnet password.
When trying to fetch their configs, the result of the job is "Unable to get results of job execution for device. Retry the job after increasing the job result wait time using the option:Resource Manager Essentials -> Admin -> Config Mgmt -> Archive Mgmt ->Fetch Settings".
Their CatOS version is 8.4(11)GLX and their SNMP system id is iso.3.6.1.4.1.9.5.51, so it's supported.
Can anyone please help me fixing this issue?
Regards.
02-18-2011 01:35 AM
The first thing you should try is restarting ConfigMgmtServer, then immediately try and fetch the config from this switch.
pdterm ConfigMgmtServer
pdexec ConfigMgmtServer
If the fetch still fails, enable debugging for ArchiveMgmt Service under RME > Admin > System Preferences > Application Loglevel Settings, reproduce the problem (after restarting ConfigMgmtServer again), then post the dcmaservice.log.
02-23-2011 12:42 AM
02-23-2011 10:19 PM
These are archived versions, and do not contain the sync job for the 2980. Please re-run the sync archive and then immediately capture and post the dcmaservice.log.
02-24-2011 08:48 AM
02-24-2011 10:45 PM
What is the IP of this switch? I'm seeing an SNMP timeout on 10.99.1.97.
02-25-2011 03:26 AM
The IP is 10.99.5.42
02-25-2011 03:38 PM
What do you see when you login to this device and try to enable yourself using the credentials in DCR? To get these credentials, go to Common Services > Device and Credentials > Device Management > Export. Export the credentials for this device, then from the LMS server try and login and enter enable mode. What do you see?
02-28-2011 08:17 AM
We did this test and we could connect in enable mode from the command line but not from the LMS. Anyway, I've told our customers to do it again. When they pass me the result, I'll post it.
02-28-2011 08:37 AM
I'm interested in EVERYTHING you see on the VTY when performing the login and enable operations.
03-01-2011 06:37 AM
w
03-01-2011 06:44 AM
03-01-2011 11:29 PM
Assuming that RME knows these local credentials, the syslog here may be the problem. Is this printed every time the user enters enable mode? If so, can you turn the mgmt logging level down to 4 to see if the problem goes away?
03-03-2011 03:39 AM
Yes, it's printed every time enters the user enters enable mode. The mgmt logging level has been changed to 4, now the syslog message doesn't appear but the problem still persists.
03-05-2011 04:33 PM
Given that this is telnet, can you provide a sniffer trace filtering on tcp/23 traffic between the LMS server and this switch when performing a config archive job? If that is too sensitive please click the "Open Service Request" button in the Actions panel in this thread to have this discussion transferred to the TAC SR. My gut is that there may be a timing issue due to the ACS server not being accessible.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide