Catalyst 1000 QoS classification very limit

[SamHou]

Does any one have QoS experience on Catalyst 1000?  I am setting up a 8 ports model.   It looks like that I have very limited capability on QoS classification due to "Per ASIC, 8 TCP port comparators and 8 UDP port comparators are supported".   If i have an access-lists like below, I wont be able to have another udp comparators in another class map because I ran out my 8 UDP comparators.  Therefore I cannot use any other udp comparator to categorize any other traffic.  Can someone share their experience on the classification on Catalyst 1000?   

ip access-list extended ACL-QOS-VOICE-EF - Y

remark [ Audio ]

permit udp any any dscp ef

permit udp any range 57400 57500 any range 2326 65535

permit udp any range 49400 49499 any range 2326 65535

exit

Thank you.  

[balaji.bandi]

It has some QOS features supported with Limitation :

Look at the config guide :

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst1000/software/releases/15_2_7_e/configuration_guides/qos/b_1527e_qos_c1000_cg/configuring_auto_qos.html