Change Ip address LMS 4.0?

[lbellicaud]

My customer want to change IP address of server LMS before to discovery device.

how does it?
or you one can find a procedure?

thanks

[AFROJ AHMAD · Accepted solution]

Hi ,

Please use the below link to change the Ip address of the server :

http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_common_services_software/3.3/user/guide/diagnos.html#wp1165007

Thanks--

Afroj

If this post answers your question, please click the "Correct Answer" button"

[Mohammed Tolib]

If your network devices are configured to specify the recipient of an SNMP notification operation (the command

snmp-server host CWLMS_IP_Address

)

then you need to add the new LMS IP address and remove the old host IP address from the configuration (use the no form of this command).

[AFROJ AHMAD]

HI ,

Use the NETConfig Option Under RME > Config Mgmt > Net Config

Create a Netconfig Job (ADHOC )to change the Ip address on all devices in One Go !!

Thanks--

Afroj

If this post answers your question, please click the "Correct Answer" button"