cisco 3850 "Switch 1: SYSTEM TEMPERATURE is UNAVAILABLE"

[bluebell81]

Hi
I am writing about the Cisco 3850.

With the sh env all command,

Switch 1: SYSTEM TEMPERATURE is UNAVAILABLE.

Switch 1: SYSTEM TEMPERATURE is OK OK?

I want to know why this message comes up.

Switch 1 FAN 2 is OK

Switch 1 FAN 2 is OK
Switch 1 FAN 3 is OK
FAN PS-1 is OK
FAN PS-2 is OK
Switch 1: SYSTEM TEMPERATURE is UNAVAILABLE
Inlet Temperature Value: 28 Degree Celsius
Temperature State: GREEN
Yellow Threshold : 46 Degree Celsius
Red Threshold    : 56 Degree Celsius

Hotspot Temperature Value: 43 Degree Celsius
Temperature State: GREEN
Yellow Threshold : 105 Degree Celsius
Red Threshold    : 125 Degree Celsius
SW  PID                 Serial#     Status           Sys Pwr  PoE Pwr  Watts
--  ------------------  ----------  ---------------  -------  -------  -----
1A  PWR-C1-350WAC                                OK              Good     Good     350
1B  PWR-C1-350WAC                                OK              Good     Good     350

Thank you.

[Diana Karolina Rojas]

Hello,

What IOS code are your device running? maybe this can be a bug.

Please do not forget to rate useful post.

Best Regards,