Im not able to upgrade the IOS to at4500e-entservicesk9-mz.152-4.E10.bin - it always revert back to IP-BASE old ISO
4500E#sh run | i boot
boot-start-marker
boot system flash bootflash:cat4500e-entservicesk9-mz.152-4.E10.bin
boot-end-marker
4500E#dir bootflash:
Directory of bootflash:/
6 -rw- 38791882 Jan 27 2019 11:12:52 +00:00 cat4500e-ipbasek9-mz.152-2.E8.bin
7 -rw- 41609690 Feb 25 2023 04:34:12 +00:00 cat4500e-entservicesk9-mz.152-4.E10.bin
8 -rw- 35 Mar 23 2019 03:17:50 +00:00 pnp-tech-time
9 -rw- 1523 Mar 23 2019 03:17:52 +00:00 pnp-tech-discovery-summary
128282624 bytes total (37240832 bytes free)
4500E#sh bootvar
BOOT variable = bootflash:cat4500e-entservicesk9-mz.152-4.E10.bin,1;
CONFIG_FILE variable does not exist
BOOTLDR variable does not exist
Configuration register is 0x2101
4500E#sh version
Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-IPBASEK9-M), Version 15.2(2)E8, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Mon 22-Jan-18 06:32 by prod_rel_team
ROM: 12.2(44r)SG9
4500E uptime is 3 hours, 42 minutes
System returned to ROM by reload
System image file is "bootflash:cat4500e-ipbasek9-mz.152-2.E8.bin"
Hobgoblin Revision 20, Fortooine Revision 1.40
Last reload reason: Reload command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco WS-C4948E (MPC8548) processor (revision 5) with 1048576K bytes of memory.
Processor board ID CAT1524S1KJ
MPC8548 CPU at 1GHz, Cisco Catalyst 4948E
Last reset from Reload
6 Virtual Ethernet interfaces
48 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.
Configuration register is 0x2101
And below is console reboot :
*Mar 10 01:17:10.277: %SYS-5-RELOAD: Reload requested by m0uln4500 on vty0 (176. 58.70.9). Reload Reason: Reload command.
**********************************************************
* *
* Welcome to Rom Monitor for WS-C4948E System *
* Copyright (c) 2003-2010 by Cisco Systems, Inc. *
* All rights reserved. *
* *
**********************************************************
Checking the partition table and boot sector...
Checking FAT, Files and Directories...
Reclaiming unused space...
Updating FAT...
Rom Monitor Program Version 12.2(44r)SG9
CPU Rev: 2.1, Board Rev: 5, Board Type: 104, CPLD Hobgoblin Rev: 20
Chassis: WS-C4948E
Front Panel Phy is Bcm5482s
Got Mac Address: 00:07:7d:64:05:3f
MAC Address : 00-07-7d-64-05-3f
Ip Address : Not set.
Netmask : Not set.
Gateway : Not set.
TftpServer : Not set.
Peer supervisor not detected or is not running IOS
Supervisor uplinks and all linecards have been reset
***** The system will autoboot in 5 seconds *****
Type control-C to prevent autobooting.
. . . . .
******** The system will autoboot now ********
config-register = 0x2101
Autobooting using the first file from bootflash.....
Rommon reg: 0x00004780
Reset2Reg: 0x00009EFF
##
Fortooine controller 0x0B5C7394..0x0B72F90B original size:0x001C685D
##################
diagsk5 version 5.0.2.3
prod: WS-C4948E part: 73-13472-01 serial: CAT1524S1KJ
Power-on-self-test for Module 1: WS-C4948E
CPU Subsystem Tests ...
seeprom: Pass
Traffic: L3 Looopback ...
Test Results: Pass
Traffic: L2 Loopback ...
Test Results: Pass
Switching Subsystem Memory ...
Packet Memory Test Results: Pass
Module 1 Passed
Rommon reg: 0x00000780
################################################################################ ####################################
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-IPBASEK9-M), Ver sion 15.2(2)E8, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Mon 22-Jan-18 06:32 by prod_rel_team
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco WS-C4948E (MPC8548) processor (revision 5) with 1048576K bytes of memory.
Processor board ID CAT1524S1KJ
MPC8548 CPU at 1GHz, Cisco Catalyst 4948E
Last reset from Reload
1 Virtual Ethernet interface
48 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.
Press RETURN to get started!
*Mar 10 01:20:31.543: %C4K_SWITCHINGENGINEMAN-6-BFDINVALIDPACKETACLAPPLIED: Cont rol plane protection against invalid BFD packets is applied
*Mar 10 01:20:51.567: %SMI-5-CLIENT: Smart Install Client feature is enabled. I t is recommended to disable the Smart Install feature when it is not actively us ed. To disable feature execute 'no vstack' in configuration mode
*Mar 10 01:20:51.635: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for typ e vlan
*Mar 10 01:20:56.051: %C4K_IOSMODPORTMAN-6-MODULEONLINE: Module 1 (WS-C4948E S/N : CAT1524S1KJ Hw: 2.0) is online
*Mar 10 01:20:59.591: %SYS-5-CONFIG_I: Configured from memory by console
*Mar 10 01:20:59.887: %SYS-5-RESTART: System restarted --
Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-IPBASEK9-M), Ver sion 15.2(2)E8, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Mon 22-Jan-18 06:32 by prod_rel_team
*Mar 10 01:21:00.063: %PNP-6-PNP_DISCOVERY_STOPPED: PnP Discovery stopped (Abort ed by non-PnP bootstrapping)
*Mar 10 01:21:00.083: %SSH-5-ENABLED: SSH 1.99 has been enabled
*Mar 10 01:21:02.995: %C4K_IOSINTF-5-TRANSCEIVERINSERTED: Slot=1 Port=49: Transc eiver has been inserted
*Mar 10 01:21:06.991: %C4K_IOSINTF-5-TRANSCEIVERINSERTED: Slot=1 Port=50: Transc eiver has been inserted
*Mar 10 01:21:08.015: %EC-5-BUNDLE: Interface GigabitEthernet1/42 joined port-ch annel Port-channel45
*Mar 10 01:21:08.035: %EC-5-BUNDLE: Interface GigabitEthernet1/43 joined port-ch annel Port-channel45
*Mar 10 01:21:08.039: %EC-5-BUNDLE: Interface GigabitEthernet1/44 joined port-ch annel Port-channel45
*Mar 10 01:21:08.047: %EC-5-BUNDLE: Interface GigabitEthernet1/45 joined port-ch annel Port-channel45
*Mar 10 01:21:08.051: %EC-5-BUNDLE: Interface GigabitEthernet1/47 joined port-ch annel Port-channel45
*Mar 10 01:21:08.067: %EC-5-BUNDLE: Interface GigabitEthernet1/48 joined port-ch annel Port-channel45
*Mar 10 01:21:08.991: %C4K_IOSINTF-5-TRANSCEIVERINSERTED: Slot=1 Port=51: Transc eiver has been inserted
*Mar 10 01:21:09.991: %EC-5-BUNDLE: Interface GigabitEthernet1/46 joined port-ch annel Port-channel45
*Mar 10 01:21:11.991: %C4K_IOSINTF-5-TRANSCEIVERINSERTED: Slot=1 Port=52: Transc eiver has been inserted
*Mar 10 01:21:16.047: %EC-5-BUNDLE: Interface Te1/51 joined port-channel Po10
*Mar 10 01:21:17.195: %EC-5-BUNDLE: Interface Te1/49 joined port-channel Po10
