Cisco ASA - Service Policy Rule - QoS - Policing

[hen3rox]

Good day,

We have recently upgraded our corperate ISP line to UP&Down 100Mbps.

We have currently in use Cisco 5515 Routers, and I want to set the optimal QoS Input and Output Policing.

For example, for 3 main subnets:

1. Network Management Subnet
2. Workstaion Management Subnet
3. Public Manageent Subnet

Attached a screenshot from the currently set policing, which I cannot place while reading how to configure a correct setup.

Looking forward to hear from you.

Thanks and regards,

Henry van der Leer 

[balaji.bandi]

You missed the  attachment to the post.

what kind of optimum policy you looking for the below subnets :

For example, for 3 main subnets:

1. Network Management Subnet
2. Workstaion Management Subnet
3. Public Manageent Subnet

[hen3rox]

Hello sir,

First of all, thanks for your reply.

Enclosed the picture (Capture PNG).

It is about a common optimum policy to share our bandwidth on the right way over our network.

So for example our subnet X.X.X.X/24 services IP from any to any.

[hen3rox]

Also I am wondering how it is possible when I enter for example a committed rate of 50000000, burst size automatically set to 25000.