03-03-2022 06:29 AM
hello guys,
please need some help with cisco ASR-902 (RSP2) 64
i have 3 routers connected to each other by wireless links PTP
the cisco ASR in in between the 2
ping from each router to the ASR gives high max delay
Success rate is 99 percent (11173/11175), round-trip min/avg/max = 1/5/600 ms
if we change the ASR to another one there is no problem
asr900rsp2-universalk9_npe.03.16.01a.S.155-3.S1a-ext
03-03-2022 10:14 AM
Hello,
could be related to control plane policing. The access list that polices ICMP traffic is 'copp-system-acl-icmp'. Check what the value is, and, if you really need ICMP to respond faster, increase the policed rate. If you are just looking for an explanantion of why you see these values, it is because the control plane limits the amount of ICMP traffic.
Check the link below on instructions how to change the control plane policy (if needed):
03-04-2022 05:03 AM
Hello Georg
the problem is also that the traffic dropped so i dont think it is with the control plane icmp
03-05-2022 01:47 AM
Hello,
if traffic is being dropped as well, that is obviously another issue. Can you post the output of:
sh interfaces x
where 'x' is the interface that connects to the other router ?
03-07-2022 01:54 AM
GigabitEthernet0/0/0 is up, line protocol is up Hardware is A900-IMA8T, address is 9c57.adfe.6880 (bia 9c57.adfe.6880) Description: DT-Q-SS056 MTU 9216 bytes, BW 1000000 Kbit/sec, DLY 10 usec, reliability 255/255, txload 2/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full Duplex, 1000Mbps, link type is auto, media type is RJ45 output flow-control is unsupported, input flow-control is on ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output never, output hang never Last clearing of "show interface" counters 3d20h Input queue: 0/375/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 30 second input rate 1000 bits/sec, 2 packets/sec 30 second output rate 9582000 bits/sec, 1162 packets/sec 1012271 packets input, 91073279 bytes, 0 no buffer Received 11695 broadcasts (0 IP multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 853533 multicast, 0 pause input 854323058 packets output, 947816951731 bytes, 0 underruns 0 output errors, 0 collisions, 0 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 pause output 0 output buffer failures, 0 output buffers swapped out
GigabitEthernet0/0/1 is up, line protocol is up Hardware is A900-IMA8T, address is 9c57.adfe.6881 (bia 9c57.adfe.6881) Description: DT-Q-220-700M MTU 9216 bytes, BW 1000000 Kbit/sec, DLY 10 usec, reliability 255/255, txload 5/255, rxload 64/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full Duplex, 1000Mbps, link type is auto, media type is RJ45 output flow-control is unsupported, input flow-control is on ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output never, output hang never Last clearing of "show interface" counters 3d20h Input queue: 0/375/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 253506000 bits/sec, 25892 packets/sec 5 minute output rate 21440000 bits/sec, 11886 packets/sec 11620639759 packets input, 14688313760621 bytes, 0 no buffer Received 11700 broadcasts (0 IP multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 688780 multicast, 0 pause input 4227830931 packets output, 758934123357 bytes, 0 underruns 0 output errors, 0 collisions, 0 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 pause output 0 output buffer failures, 0 output buffers swapped out
Please find the the sh interface of the two interfaces connected from each side
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide