Cisco Business Dashboard creating a new network (FindIT)

[loranger]

Hello,

Switch : SG250X-48P
Firmware Version : 2.5.5.47

Cisco Business Dashboard : 2.5.1.20221202

I am trying to add a new network using switch SG250X-48P with Probe operation in to the CBD.
In Adminitration -> FindIT Settings (as here below):

Here I have to give two things that I'm not sure where to get them.
"FindIT Network Manager Key ID" - do I need to get it from CBD (Administration -> users) and generate Access Key from there?
"FindIT Network Manager Secret" - I have no idea where to take it from

I would be very grateful for your help.

[marce1000]

 - Ref : https://www.cisco.com/c/en/us/td/docs/cloud-systems-management/network-automation-and-management/cisco-business-dashboard/technical-reference/b_CBD_Device_Support_List.html
       Check Table 5 : looks like the SG250 will at least need firmware version 2.5.7.x — 2.5.8.x , for probe support , you may need to upgrade the SG, 

 M.

[loranger]

Thanks for your reply, the last thing is I have to get "FindIT Network Manager Secret". 

Do you know where I can get it from?

[Georg Pauwen · Accepted solution]

Hello,

I think you have to generate the key on the MyProfile page (item 2. on page 12 of the guide linked below):

https://www.cisco.com/c/dam/en/us/td/docs/cloud-systems-management/network-automation-and-management/cisco-findIT-network-management/QSG/b_Cisco_FindIT_Network_Management_QSG_2_1.pdf