cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1009
Views
5
Helpful
1
Replies

cisco configuration using only snmp

egomezelvira
Level 1
Level 1

Hello,

i would like to know if it is possible to make changes in the configuration of the cisco equipment with CiscoWorks LMS 2.6 if i have only configured read/write community.(no telnet password configured)

Thank you.

Eduardo

1 Reply 1

nhabib
Level 9
Level 9

Yes, you may. RME will perform an snmpset to trigger a tftp download.