Cisco IOS XR Temperature OID

[sgalay0001]

Hi there!

We`ve got cisco asr 9010 with OS XR Software, Version 4.3.4, and there is a question: how can i get temperature of nodes by SNMP? i figure out that i must change my snmp-server configuration with a SystemOwner and i did it:

RP/0/RSP0/CPU0:cisco#show run snmp-server community
Tue Dec  2 12:59:36.547 FET
snmp-server community ***** RO SystemOwner snmp

Than i get the card id

root@server:~$ snmpwalk -v2c -c ***** 192.168.1.10  1.3.6.1.2.1.47.1.1.1.1.7 | grep temper | grep RSP
iso.3.6.1.2.1.47.1.1.1.1.7.28783653 = STRING: "temperature 0/RSP0/CPU0"

Then i gen sensor name and id

root@server:~$ snmpwalk -v2c -c ***** 192.168.1.10   1.3.6.1.2.1.47.1.1.1.1.4.28783653
iso.3.6.1.2.1.47.1.1.1.1.4.28783653 = INTEGER: 38557239
root@server:~$ snmpwalk -v2c -c ***** 192.168.1.10   1.3.6.1.2.1.47.1.1.1.1.2.28783653
iso.3.6.1.2.1.47.1.1.1.1.2.28783653 = STRING: "Hot Temperature SensorHotspot0"

Then i`m trying to get the value and im getting this

root@server:~$ snmpwalk -v2c -c ***** 192.168.1.10 1.3.6.1.4.1.9.9.91.1.1.1.1.4.28783653
iso.3.6.1.4.1.9.9.91.1.1.1.1.4.28783653 = No Such Object available on this agent at this OID

Tell me please, what is correct OID to get temperature by snmp?

[AFROJ AHMAD]

Hi,

You are following the right procedure , and the Temperature OID is also correct "1.3.6.1.4.1.9.9.91.1.1.1.1.4".

Do the SNMP WALK on the complete box for this OID and see you get some values for other modules, if not , try to restart the "SNMP" process and check the issue again.

# process restart SNMPD

**No issue with the OID**

Thanks-

Afroz

****Ratings Encourages Contributors ****

[sgalay0001]

Hi, thanks for answering

if i try snmpwalk just with this oid, I'm still have nothing

root@server:~$ snmpwalk -v2c -c ***** 192.168.1.10 1.3.6.1.4.1.9.9.91.1.1.1.1.4
iso.3.6.1.4.1.9.9.91.1.1.1.1.4 = No Such Object available on this agent at this OID

process restart SNMPD give me nothing)

ill try to find this oid on my router and there is no result

RP/0/RSP0/CPU0:cisco#show snmp mib | i 1.3.6.1.4.1.9.9.91.1.1.1.1.4
Wed Dec  3 01:15:28.046 FET

any advices?

thanks for helping