10-25-2013 09:27 AM
Hello!
I have a problem with LMS 4.2. When I deploing software images I have a report that file vtpfile is deleted because it not includet in exclusion list.Somebody know where is this LIST is ?
10-26-2013 01:48 PM
Me again! I really blow my mind. Somebody can help me to find this list. PLEASE )
10-26-2013 08:56 PM
Hi Alex,
Share the swim job log.
Thanks-
Afroz
10-27-2013 05:16 AM
Processing Device : cat3560_v_4_3
Start Time : Fri Oct 25 13:30:16 MSK 2013
Device is locked for exclusive access.
The supported protocols for image transfer are: RCP,TFTP,SCP
Connecting to the device using TELNET...
Connected successfully.
Going to perform delete operation based on the patterns in the List [.*\.bin, html, snmp, help, .*\.tar]
Files that will be excluded from deletion are: [vlan\.dat, config\.text, config\.txt, private-config\.text, private-config\.txt, multiple-fs, env_vars, system_env_vars, info\.ver, info]
Storage from which files are to be deleted is: flash
Available Flash files: multiple-fs,vtpfile,private-config.text,config.text,c3560-ipbasek9-mz.122-55.SE5,
multiple-fs -> will be excluded from deletion. File matched with the pattern: "multiple-fs"
vtpfile -> Doesn't match with the patterns in the delete list.
private-config.text -> will be excluded from deletion. File matched with the pattern: "private-config\.text"
config.text -> will be excluded from deletion. File matched with the pattern: "config\.text"
c3560-ipbasek9-mz.122-55.SE5 -> Doesn't match with the patterns in the delete list.
Unable to get the needed space by deleting the files in deleteList.
Going to perform delete operation leaving the files that match the patterns in the excludeList: [vlan\.dat, config\.text, config\.txt, private-config\.text, private-config\.txt, multiple-fs, env_vars, system_env_vars, info\.ver, info]
Storage from which files are to be deleted is: flash
Available Flash files: multiple-fs,vtpfile,private-config.text,config.text,c3560-ipbasek9-mz.122-55.SE5,
multiple-fs -> will be excluded from deletion. File matched with the pattern: "multiple-fs"
vtpfile-> deleted
private-config.text -> will be excluded from deletion. File matched with the pattern: "private-config\.text"
config.text -> will be excluded from deletion. File matched with the pattern: "config\.text"
c3560-ipbasek9-mz.122-55.SE5-> deleted
Obtained sufficient free space after deletion.Proceeding with distribution operation
Retrieving configuration file from the device...
Current device config is copied to C:\PROGRA~2\CSCOpx\files\rme\jobs\swim\1040\cat3560_v_4_3_Config
Checking if HTTP server is enabled on the device...
Http Server is enabled. Going to disable it...
Disabled successfully.
Copying c3560-ipservicesk9-mz.150-2.SE2.bin from Software Repository to rcp-specific directory.
Copied successfully to C:/PROGRA~2/CSCOpx/temp/rep_sw_2688677568767946560
Loading image file to flash device : rep_sw_2688677568767946560 --> flash:c3560-ipservicesk9-mz.150-2.SE2.bin using RCP
Loading image file to flash device is completed.
Total time for copying the image - 3 Minutes 4 Seconds
Enabling HTTP server on the device...
Enabled successully.
Updating config file during software upgrade process
Successfully updated.
Reboot for the device not selected, please do a manual reboot.
Device is unlocked.
Device Upgrade Result : Success
End Time:Fri Oct 25 13:40:16 MSK 2013
10-27-2013 06:53 AM
I try to find this in the codes but I could't. Exclude list is something which looks at the coded filters listed in the codes but I could't find that in it
Check with TAC , they will contact BU to find the answer..
10-27-2013 07:29 AM
Is it posible to create job that will put this file back? I have no service contract ot create TAC (((
10-27-2013 09:50 AM
unfortunately there is no such job exist as per my knowledge.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide