03-27-2025 07:11 PM
Hi there!
Context:
I have a management pc (192.168.1.3/24, gateway:192.168.1.1) connected to my 3504-WLC (192.168.1.4/24, gateway:192.168.1.1) on Vlan 1. On Vlan 2 I have my 3702i LAP (192.168.2.2/24, gateway:192.168.2.1), a pc (192.168.2.11, gateway:192.168.2.1), and a laptop (192.168.2.10/24, gateway:192.168.2.1). The L3 switch gives vlan 1 an SVI with 192.168.1.1/24 and vlan 2 an SVI with 192.168.2.1/24.
Problem:
My laptop connects to the LAP and both the LAP and client laptop appear in the WLC's website GUI, however I cannot ping the default-gateway (192.168.2.1) nor anything from the laptop. The PC in Vlan 2 can ping the default gateway (192.168.2.1).
Question:
Is this a limitation of Packet Tracer or have I forgotten a setting? Thank you!
I attached my packet tracer file below.
Network
Ping from Wireless Laptop
L3 Switch's Configuration
WLC gui (1)
WLC gui (2)
WLC gui (3)
Solved! Go to Solution.
03-28-2025 01:34 AM
- FYI : Community group for Packet Tracer project questions
M.
03-28-2025 01:34 AM
- FYI : Community group for Packet Tracer project questions
M.
03-28-2025 08:10 AM
Got it!
Thanks for the tip.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide