Re: Cisco PI 3.1 WLC & Client Statistics issue.

AK002 · ‎08-29-2017

Hi All,

Can any one help on the below issue in PI 3.1

Cisco Prime Version 3.1. We have noted that the graphs stop presenting information, when you add and then re add wireless LAN controller the statistics then begin to populate again but over time they stop. We have had this occur a few times and have re added to Prime but I would assume this isn’t expected behaviour.

Regards, AK

marce1000 · ‎08-29-2017

- Is there a need for a continious re-adding of the controller.

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

AK002 · ‎08-30-2017

No,

We are adding because the statistics are not showing. After adding its showing.

Regards,

Arun

marce1000 · ‎08-30-2017

- Ok,possibly try PI 3.1.6 if not already installed , and or with latest update ; testing with PI3.2 is also an alternative but would require more time (indeed)

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

AK002 · ‎08-30-2017

Currently using 3.1.0 version..

Whether the below cavetes helps in 3.1.6 to solve this issue.

CSCvd71172 TransientObjectException logged for WirelessControllers

AK