cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2161
Views
0
Helpful
4
Replies

Cisco Prime 3.4 alarm last message repeated n times

Nadia Bbz
Level 1
Level 1

Dear Team;

 

In prime i get  two critical notification in Cisco Nexus 3048 Switch =>>> 

 

1. last message repeated 16 times

2. can't dlsym ssnmgr_need_to_buffer_command: please link this binary with ssnmgr.so! - snmpmib_proc

 

how should i resolve this issue

Thank you in advance to any one who may be able to give me some ideas.

4 Replies 4

marce1000
VIP
VIP

 

 - Looks to be a software bug on the 3408 ; check comparability notes from Prime and software releases supported on the device (and recognized by  Prime)  from the link below. 

   https://www.cisco.com/c/dam/en/us/td/docs/net_mgmt/prime/infrastructure/3-4/supported/devices/PI34-Supported-Device-List.xlsx

            If applicable , feasible and or desirable upgrade the 3408 and check if the problem persists.

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

hi @marce1000 ,

all version of nexus 3408 is compatible with prime 3.4 

when i type the command  ""  show logging last 20 "" in switch i get the result below

 

nexus-01# show logging last 20
2020 Apr 27 02:14:35 SWS-01-0102010 last message repeated 16 times
2020 Apr 27 04:14:36 SWS-01-0102010 last message repeated 16 times
2020 Apr 27 06:14:37 SWS-01-0102010 last message repeated 16 times
2020 Apr 27 08:14:38 SWS-01-0102010 last message repeated 16 times
2020 Apr 27 10:14:40 SWS-01-0102010 last message repeated 16 times
2020 Apr 27 12:12:57 SWS-01-0102010 last message repeated 15 times
2020 Apr 27 12:14:41 SWS-01-0102010 %USER-2-SYSTEM_MSG: can't dlsym ssnmgr_need_to_buffer_command: please link this binary with ssnmgr.so! - snmpmib_proc
2020 Apr 27 14:14:24 SWS-01-0102010 last message repeated 15 times
2020 Apr 27 14:14:42 SWS-01-0102010 %USER-2-SYSTEM_MSG: can't dlsym ssnmgr_need_to_buffer_command: please link this binary with ssnmgr.so! - snmpmib_proc
2020 Apr 27 16:14:43 SWS-01-0102010 last message repeated 16 times
2020 Apr 27 18:14:44 SWS-01-0102010 last message repeated 16 times
2020 Apr 27 20:14:45 SWS-01-0102010 last message repeated 16 times
2020 Apr 27 22:14:46 SWS-01-0102010 last message repeated 16 times
2020 Apr 28 00:14:47 SWS-01-0102010 last message repeated 16 times
2020 Apr 28 02:14:49 SWS-01-0102010 last message repeated 16 times
2020 Apr 28 04:14:50 SWS-01-0102010 last message repeated 16 times
2020 Apr 28 06:14:51 SWS-01-0102010 last message repeated 16 times
2020 Apr 28 08:14:52 SWS-01-0102010 last message repeated 16 times

 

 

        > ssnmgr_need_to_buffer_command: please link this binary with ssnmgr.so! - snmpmib_proc

  Ok,. for all compatible but that message is probably a bug in the current version you are running on the 3408

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

 

hey @marce1000 ;

 

 the version of software is :

 

 cisco Nexus 3048

Software version 7.0(3)I4(7)

 

how to disable message repeated 16 times

 

thank you in advance

 

Review Cisco Networking for a $25 gift card