Cisco Prime Infrastructure 2.2.0 to 3.0 Inline upgradation

[mohammed.jaseem]

Hi All,

Is there any option for Cisco Prime Infrastructure 2.2.0 to 3.0 Inline upgradation ? If yes, Can anyone please send me the procedure. I just happened to noticed in the Cisco Website that there is no inline upgradation. And i have been found on google that inline upgradation is possible from 2.2.0 to 3.0.

Appreciate your response in this regard.

Regards,

Jaseem

[Marvin Rhoads]

The inline upgrade requirements are listed here:

http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-0/quickstart/guide/cpi_qsg.html#pgfId-124831

The step by step procedures are further down in the same document:

http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-0/quickstart/guide/cpi_qsg.html#19365

[mohammed.jaseem]

Hi Marvin,

Thanks for your reply. Can you please advise if we remove the High Availability from Cisco Prime during the upgradation, How we can add it back and alos how we can upgrade that server ?

Regards,

Jaseem

[Marvin Rhoads]

As noted in the quick start guide, you first remove HA prior to beginning the upgrade.

Then upgrade both servers separately.

When the upgrade is complete, re-register the secondary unit per the procedures in the Admin Guide:

http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-0/administrator/guide/PIAdminBook/config_HA.html#52342

[mohammed.jaseem]

Many thanks. It worked

[Marvin Rhoads]

You're welcome.

Please mark your question as answered to help future seekers.