Cisco Prime Infrastructure 3.0.2 - Audit Status Mismatch
Hopefully someone can help me understanding how this tool works, as it's completely undocumented by Cisco.
Here's the scenario.
You go go "Inventory->Device Management->Network Devices-> Wireless Controller.
Then you sort them on "Audit status mismatch".
Select any controller device and click "configure->audit now".
After the audit is done, you get these options that are really undocumented what they do:
Now the problem is that in this case, since the system has been down for a couple of days, engineers have been doing changes on the WLC's themselves not on any templates or from Prime. So the logic is to NOT push down values from prime to the controllers.
What I want to achieve is the reverse, to pull the configurations from the Controllers and have Prime audit them as "the valid working configuration".
So this is the information you get when you click "refresh config from controller" and it's extremely unclear what this warning message means:
This operation will Retain template associations from configuration objects in the database, and retain templates for this controller from associated config groups.
Configuration objects in the database are automatically refreshed. After refresh you might see a mismatch between the template and the controller configuration.
What exactly does that mean?
Does it update the templates or just downloads the configuration from the WLC?
For now, no engineers are allowed to use prime until this has been sorted out. Since in 2.2 it used to update the templates and told prime to actually use the configuration pulled from the WLC's themselves. I am not sure about this message at all!
Inviting all network professionals in operations! We'd like to understand what would be valuable for you in a mobile application. Your response will help Cisco improve a product feature that could benefit you. Thanks!
Click here to take the sur...
Cisco’s software-defined wide area network (SD-WAN) solution allows user to quickly and seamlessly establish an overlay fabric to connect an enterprise’s data centers, branch and campus locations, as well as colocation facilities in order to imp...
1. Log into CLI of DNAC:
ssh maglev@< DNAC appliance IP> -p 2222
2. Run this curl command to get token to get member id:
curl -X POST -u admin:<admin user password> -H -V https://<CLUSTER-IP>/api/system/v1/identitymgmt/token
Enterprise Switching Business Unit is glad to announce Beta release 16.12.2 for all Catalyst 9200/9300/9400/9500/9600 and Catalyst 3650/3850 Platforms. This release is made available to allow users to test, evaluate and share fee...
Purpose of the document
This document describes the general recommendations or best practices when designing and deploying the Cisco SD-Access technology. The document assumes that the reader has a general overview of Cisco's SD-Access for Distributed C...