Estimado marce1000 buenas tardes,
Se tuvo apoyo del TAC al caso en donde se ejecutó un script (el cual no está documentado) y se aplicó un reinicio desde el vmware ya que nuestro Prime es virtual y subieron los servicio y se limpió el vol var.
Comparto parte de la salida de CLI realizada:
main() {
trunk_and_compare
insert_here
disable_serial_console
remove_dirs_suppress_logs
clean_clientmqueue
VAR_SIZE=$(df -h | grep /var | awk '{$1=$1;printf $4}')
echo " /var volume has "$VAR_SIZE" available"
}
#====| Execute }==========================================================>
# Functions
#=========================================================================>
main
#====| End Script }=======================================================>
# Cleanup
#=========================================================================>
echo
echo " If this is an HA pair, run ncs ha status. Check if HA is Manual or Auto. "
echo " Run this script on BOTH servers "
echo
echo "To completely resolve the issue, stop and start the NCS service OR reload the machine "
echo "ncs stop & ncs start verbose "
echo
echo "This script resolves CSCvp17013 & CSCvo65492 & CSCvr53612 & CSCvu05246 & CSCvu35406 & CSCvv32128"
echo
echo "Log Cleanup Script successfully finished on `date` "
echo
echo
trap finish exit 0
[root@ltdpwec-040 ~]# chmod u+x ./VAR_CEALUP.sh
[root@ltdpwec-040 ~]# ./VAR_CEALUP.sh
./VAR_CEALUP.sh: line 1: t: command not found
./VAR_CEALUP.sh: line 1: Cisco: command not found
./VAR_CEALUP.sh: line 1: VAR_CLEANUP.sh: command not found
/var clean up script was started on Thu Apr 29 12:20:45 -05 2021
Checking dependencies ...
Truncating /var/log/wtmp then updating owner and group
Owner:Group on file /var/log/wtmp is root:root
Truncating /var/log/messages then updating owner and group
Owner:Group on file /var/log/messages is root:root
Truncating /var/log/maillog then updating owner and group
Owner:Group on file /var/log/maillog is root:root
Truncating /var/log/secure then updating owner and group
Owner:Group on file /var/log/secure is root:root
Truncating /etc/logrotate.conf then updating owner and group
Owner:Group on file /etc/logrotate.conf is root:root
Removed symlink /etc/systemd/system/getty.target.wants/serial-getty@ttyS0.service.
Removed symlink /etc/systemd/system/getty.target.wants/serial-getty@ttyS1.service.
serial console ttyS0 and ttyS1 have been disabled
removing directories with bad permissions
suppressing messages from syslog
restarting rsyslog daemon
removing files from /var/spool/clientmqueue
/var volume has 3.4G available
If this is an HA pair, run ncs ha status. Check if HA is Manual or Auto.
Run this script on BOTH servers
To completely resolve the issue, stop and start the NCS service OR reload the machine
ncs stop & ncs start verbose
This script resolves CSCvp17013 & CSCvo65492 & CSCvr53612 & CSCvu05246 & CSCvu35406 & CSCvv32128
Log Cleanup Script successfully finished on Thu Apr 29 12:20:51 -05 2021
Removing the script ./VAR_CEALUP.sh
[root@ltdpwec-040 ~]# du -h /var --max-depth=6 | egrep '[0-9](G|M)' | sort -k2
225M /var
8.5M /var/cache
1.5M /var/cache/man
7.0M /var/cache/yum
7.0M /var/cache/yum/x86_64
7.0M /var/cache/yum/x86_64/7Server
7.0M /var/cache/yum/x86_64/7Server/primerepo
6.5M /var/cache/yum/x86_64/7Server/primerepo/gen
141M /var/lib
133M /var/lib/rpm
8.2M /var/lib/yum
1.4M /var/lib/yum/history
6.7M /var/lib/yum/yumdb
1.5M /var/lib/yum/yumdb/l
1.1M /var/lib/yum/yumdb/p
60M /var/log
2.7M /var/log/ade
2.0M /var/log/anaconda
38M /var/log/audit
12M /var/spool
12M /var/spool/mail
3.9M /var/tmp
3.7M /var/tmp/oradiag_root
3.7M /var/tmp/oradiag_root/diag
3.7M /var/tmp/oradiag_root/diag/clients
3.7M /var/tmp/oradiag_root/diag/clients/user_root
3.7M /var/tmp/oradiag_root/diag/clients/user_root/host_67880744_80
[root@ltdpwec-040 ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/smosvg-rootvol 3.8G 46M 3.6G 2% /
devtmpfs 5.9G 0 5.9G 0% /dev
tmpfs 5.9G 0 5.9G 0% /dev/shm
tmpfs 5.9G 633M 5.3G 11% /run
tmpfs 5.9G 0 5.9G 0% /sys/fs/cgroup
/dev/mapper/smosvg-usrvol 6.7G 1.4G 5.0G 22% /usr
/dev/sda2 93M 1.6M 87M 2% /storedconfig
/dev/mapper/smosvg-recvol 93M 1.6M 87M 2% /recovery
/dev/mapper/smosvg-altrootvol 93M 1.6M 87M 2% /altroot
/dev/mapper/smosvg-optvol 203G 78G 115G 41% /opt
/dev/mapper/smosvg-home 93M 1.9M 86M 3% /home
/dev/mapper/smosvg-localdiskvol 44G 3.7G 38G 9% /localdisk
/dev/sda1 477M 150M 302M 34% /boot
/dev/mapper/smosvg-tmpvol 1.9G 3.1M 1.8G 1% /tmp
/dev/mapper/smosvg-storeddatavol 9.5G 1.9G 7.2G 21% /storeddata
/dev/mapper/smosvg-varvol 3.8G 233M 3.4G 7% /var
[root@ltdpwec-040 ~]# /opt/CSCOlumos/bin/wcsadmin.sh status
Gracias por tu tiempo en las respuestas.
Saludos,
Johnny Rivero
