I added over 4800 devices to my new instance of CiscoWorks LMS 3.1 using the dcrcli tool and a about 75% of them are stuck in the RME pending state. About 900 of them have moved to the normal state and inventory and config archive collection has been successful on them. 3950 have not moved from the pending state and when I click pending no devices show up. They also show as failed under the inventory collection state. I am new to CW so any help would be apreciated.
“Catalyst 8500 Series - Deep Dive”
This event will have place on Tuesday 17th, November 2020 at 10hrs PDT
The Catalyst 8500 Series Edge Platforms are built with the highly programmable, third-generation Cisco Quantum Flow Processor and designed for ...
“Catalyst 8000 Edge Platforms Family Overview”
This event will have place on Wednesday 4th, November 2020 at 10hrs PDT
Designed for an intent-based networks, the Cisco Catalyst 8000 Edge Platforms family offers best-in-class networking and security ...
I'm currently redistributing OSPF to BGP and setting a local pref on the routes. Currently this works fine and having no issues. ip prefix-list ospf-routes seq 10 permit 172.16.100.0/24
route-map ospf-bgp permit 10
match ip address prefix-list ...
Cisco SD-WAN Cloud OnRamp allows you to simplify and secure connectivity to cloud applications and public clouds. Interested in testing out the latest Cisco Cloud OnRamp solutions?
Sign up to try out various use cases with the Cisco SD-WAN Cloud ...
“Use Serviceability Features to Troubleshoot your Cat9K as a Cisco TAC Engineer”
This special event is open only to Cisco Customers and Partners.
Many pages in the Cisco Community are accessible only to Cisco customers, partners, or logged in ...