Ciscoworks LMS 3.2 compliance mgmt negation problem 2

[tim.cooper]

Sorry one more question,

If I also wanted to remove all SNMP traps bar: -

snmp-server host 10.10.10.x (where x is any ip in the last octet)

From a device, would I use

- [#snmp-server host (!#10\.10\.10\..*#).#]

Any help appreciated

[Joe Clarke]

No, the pattern is:

- [#snmp-server host (!?10\.10\.10\..*)#]

[tim.cooper]

Thanks Joseph,

But if the line is say: -

snmp-server host 10.10.10.1 testROmon

Would I not need the .*# for the extra word? I guess this would only be needed if I were also searching for variations in this word?

[Joe Clarke]

You could do:

- [#snmp-server host (?!10\.10\.10\..*).*#]