Hello Team, Thank you for

sivakumar.ks · ‎08-01-2006

hi,

Can anyone help me how to do bulk import of all network switches and routers in ciscoworks LMS bundle 2.5.

I have hostname , management IP address and SNMP RO. I need sample CVS or xml file to do bulk import with only hostname and management IP address.

Can anyone pls help me

siva

frankzehrer · ‎08-01-2006

Hi Siva,

for device and Credentials a CSV files has the following format:

; This file is generated by DCR Export utility

Cisco Systems NM Data import, Source=DCR Export; Type=DCRCSV; Version=3.0

;

;Start of section 0 - Basic Credentials

;

;HEADER: management_ip_address,host_name,domain_name,device_identity,display_name,sysObjectID,dcr_device_type,mdf_type,snmp_v2_ro_comm_string,snmp_v2_rw_comm_string,snmp_v3_user_id,snmp_v3_password,snmp_v3_engine_id,snmp_v3_auth_algorithm,rxboot_mode_username,rxboot_mode_password,primary_username,primary_password,primary_enable_password,http_username,http_password,http_mode,http_port,https_port,cert_common_name

;

10.20.30.35,tac-wl-se-035,dtntac.local,,tac-wl-se-035,1.3.6.1.4.1.9.1.630,,278325088,public,,,,,,,,,,,,,,,,

To use this devices in RME be sure you have set the options in RME -> Admin -> Device Mgnt. -> Device Management Settings.

Hope that helps.

Best regards,

Frank

tirabor01 · ‎05-30-2015

Hello Team,

Thank you for your ususal support.

Trust my mail meets you well.

I kindly need a technical assistance for generating a CSV file or XML file template that would be used for bulk import of network devices on CISCO PRIME LMS 4.2.

I tried using a CSV file template for importing but i got an error stating invalid template.

I also used the XML file template,it was not invalid but the CISCO PRIME LMS 4.2 could not discover any devices.

Please I do need urgent assistance to generate a CSV file template or XML file template that would be compatible with CISCO PRIME LMS 4.2.

Kind Regards,

Tioluwani Irabor

CSCO11624940.

David Stanford · ‎08-02-2006

You can find a sample csv file for import in the online help portion of LMS. You can also add one device manually, then export it to csv to have an actual csv file that you can view and modify. You can then add entries to it and import it again.

sivakumar.ks · ‎08-02-2006

Hi,

Thanks for the info. I would like to know how to add management subnet range in group so that device will get discovered automatically based on SNMP traps.

siva