Ciscp PI 2.1 Appliance booting issue

[mohammad saeed]

Hi Guys,

I have one Cisco PI 2.1 Appliance and have the DVD for PI2.1 software and trying to boot the dvd from appliance but no hope. when I choose boot fronm DVD/CD gave not load and error! 

How to solve this issue 

Thanks for all

Mohammad

[Flavio Miranda]

Which error did you get mate?

[mohammad saeed]

Connecting devices and adapters

[mohammad saeed]

Hi Flavio

I didn't see andy drivers from F1 setup ? what shall I do for this issue! do I need to update the BIOS and how?

Thanks

Mohammad

[Flavio Miranda]

Considering you are handling an appliance you shouldn't have problem with that.

It is a new one?

[mohammad saeed]

Yes it's a new one I am sure! 

[Flavio Miranda]

But a new PI appliance shouldn't have PI already?

[mohammad saeed]

I have PI appliace with DVD PI installer!

I don't know really! I used to install PI with Vmware.

I am stuck with it two days I don't know how to solve it!

[mohammad saeed]

this is the order:

PRIME-NCS-APL-K9

PI-APL-IMAGE-2.1

AIR-PWR-CORD-UK

Applieance and Image inlcuded withDVD to install it separately I think!

[Flavio Miranda]

If you reboot it, press F6 can you see the DVD driver as an option?

[mohammad saeed]

I press F12 and see yes DVD/CD , but when I chose it gave me a message  : Boot Faile press enter to contiue

[Flavio Miranda]

Cisco docs refers to f6.

Are you using CIMC?

[mohammad saeed]

No CIMC in this appliance...just reboot and UEFI loading then see connecting booting device and nothing happen then gave me option F1 F2 anf F12 

looks like empty server?

[mohammad saeed]

Any Solution please!

[Flavio Miranda]

I recommend you take a look here. 

It is not expected this behavior you are describing

https://www.google.com.br/url?sa=t&source=web&rct=j&url=https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-0/hardware_install/guide/Cisco_PI_Hardware_Appliance_Installation_Guide/reInstallUCS.html&ved=0ahUKEwjk2tzU8sDWAhUMhJAKHWZaB...