Hello ,
I use this command to set Preference = LTE .
cellular 0/2/0 lte technology lte
After this command it change to LTE .
cisco_1117#show cellular 0/2/0 radio
Radio power mode = online
LTE Rx Channel Number = 550
LTE Tx Channel Number = 18550
LTE Band = 1
LTE Bandwidth = 10 MHz
Current RSSI = -55 dBm
Current RSRP = -84 dBm
Current RSRQ = -12 dB
Current SNR = 0.1 dB
Physical Cell Id = 111
Number of nearby cells = 2
Idx PCI (Physical Cell Id)
--------------------------------
1 111
2 170
Radio Access Technology(RAT) Preference = LTE
Radio Access Technology(RAT) Selected = LTE
But when I do "reload" and the router is going up I check the Preference and it auto .
Someone know why ?
cisco_1117#show cellular 0/2/1 radio
Radio power mode = online
LTE Rx Channel Number = 550
LTE Tx Channel Number = 18550
LTE Band = 1
LTE Bandwidth = 10 MHz
Current RSSI = -56 dBm
Current RSRP = -84 dBm
Current RSRQ = -12 dB
Current SNR = 1.8 dB
Physical Cell Id = 111
Number of nearby cells = 3
Idx PCI (Physical Cell Id)
--------------------------------
1 111
2 234
3 170
Radio Access Technology(RAT) Preference = AUTO
Radio Access Technology(RAT) Selected = LTE