Determining client roaming pattern using Prime Infrastructure
Environment is 2x 5500 WLC:s in HA SSO.
I'm currently in the process of planning an upgrade of access points in a production environment, as such I need to identify roaming areas for certain production critical clients. In this documentation I've found where I think I'll need to look:
But when I enter that view of any of the interesting clients, it's empty. Does this indicate that the client is not actually roaming between AP:s?
If above feature of viewing "roam reason" is not indicative of how a client roams:
When I select a client I'm presented with the "Association history" graph, where it's shown which AP:s the client have been associated with. Can this graph be used in order to determine how a client roams?
If either of these options are not good for tracking a client roaming pattern, is there any good tool built into Prime which can help determining this?
Hello!I'm looking for a way to make my EEM script more dynamic and automated for my environment. This is what I have - basically I just capture the 4 IPSec peer IP addresses of each neighbor and insert this data into 4 different variables. ...
Hi all,I have a couple of Nexus9k switches. I need to get tcpdump from the physical interface which connected to the server. I'm looking for a specific protocol on tcpdump so that which feature should I use? I asked that because I couldn't full...
We are building out our first few AAR polices and are running into an error message.Built Global Policy with SLA class and traffic rules for voice traffic, attached to to the sites and VPN we needed, no issue. Building a second policy for management ...
Cisco Champion Radio · S7|E45 Network Insights with AI Endpoint Analytics
Identifying who and what is on the network is a challenge for many organizations. Incomplete visibility makes it difficult to implement advanced security policies and recommendatio...