For some reason I am unable to use the Web GUI to access configuration for a IPS-4345-K9. Could anyone tell me how to set up an SNMP V3 user via command line on this device?
I found references saying to use:
snmp-server user <user name> SNMP_GROUP1 v3 auth md5 <auth password> priv aes 128 <priv password>
snmp-server user <user name> V3Group v3 auth [sha/md5] [password]
set snmp user <user name> authentication md5 [password]
and none of these worked.. they all give me unrecognized command errors.
I was able to get a response from show snmp users (showed me that there are none) and show snmp engineID