Here are the Configurations:
Switch2->AP9(Root) - AP10(Leaf Mode)-> Cisco Switch
Switch2
interface GigabitEthernet1/0/24
description xover-hmhsw03
switchport trunk allowed vlan 1-499
switchport trunk native vlan 2
switchport mode trunk
spanning-tree bpdufilter enable
Switch3
interface GigabitEthernet1/0/24
description xover-hmhsw02
switchport trunk allowed vlan 1-499
switchport trunk native vlan 2
switchport mode trunk
spanning-tree bpdufilter enable
AP10
AC_DISCOVERY_FCLD_PASSWD_ENC:=
AC_CTL_PORT:=5246
AP_DATA_CHAN_SEC:=clear,ipsec,dtls
BONJOUR_GW:=2
MESH_AP_TYPE:=1
MESH_AP_SSID:=C5MESH
MESH_AP_BSSID:=
MESH_AP_PASSWD_ENC:=MmIyYTIxM2MwODFlMzY2NDRlMmYzODcx
MESH_ETH_BRIDGE:=1
MESH_ETH_BRIDGE_VLANS:=2,6,4,16,12,104,106,240,250
MESH_MAX_HOPS:=4
MESH_AP_BGSCAN:=0
MESH_SCORE_HOP_WEIGHT:=1000
MESH_SCORE_CHAN_WEIGHT:=1
MESH_SCORE_RATE_WEIGHT:=1
MESH_SCORE_BAND_WEIGHT:=100
MESH_SCORE_RSSI_WEIGHT:=100
WAN_1X_ENABLE:=0
WAN_1X_USERID:=
WAN_1X_PASSWD_ENC:=
WAN_1X_METHOD:=0
LED_STATE:=2
FAP_ETHER_TRUNK:=0
AP9
ALLOW_SSH:=2
AC_DISCOVERY_TYPE:=0
AC_IPADDR_1:= 10.94.2.1
AC_IPADDR_2:=
AC_IPADDR_3:=
AC_HOSTNAME_1:=_capwap-control._udp.example.com
AC_HOSTNAME_2:=
AC_HOSTNAME_3:=
AC_DISCOVERY_MC_ADDR:= 224.0.1.140
AC_DISCOVERY_DHCP_OPTION_CODE:=138
AC_DISCOVERY_FCLD_APCTRL:=
AC_DISCOVERY_FCLD_ID:=
AC_DISCOVERY_FCLD_PASSWD_ENC:=
AC_CTL_PORT:=5246
AP_DATA_CHAN_SEC:=clear,ipsec,dtls
BONJOUR_GW:=2
MESH_AP_TYPE:=0
WAN_1X_ENABLE:=0
WAN_1X_USERID:=
WAN_1X_PASSWD_ENC:=
WAN_1X_METHOD:=0
LED_STATE:=2
FAP_ETHER_TRUNK:=0
