cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1345
Views
0
Helpful
2
Replies

Creating Switch ACL in Prime Infrastructure 2.0

alex.dersch
Level 4
Level 4

Hello,

any idea if it possible to create a cli template to deploy access lists for switches and routers. It should be possible to define source and destination ip addresses as well as multiple line.

thanks in advanced

Alex

1 Accepted Solution

Accepted Solutions

AFROJ AHMAD
Cisco Employee
Cisco Employee

Hi Alex,

Yes ,it is possible. you can check the below link:

http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/1-2/user/guide/prime_infra_ug/create_temps.html#wp1124827

Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****

View solution in original post

2 Replies 2

AFROJ AHMAD
Cisco Employee
Cisco Employee

Hi Alex,

Yes ,it is possible. you can check the below link:

http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/1-2/user/guide/prime_infra_ug/create_temps.html#wp1124827

Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****

thanks Afroz, you saved my day.

regards

Alex

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: