Deploying Cisco Mobility Express 2802i

[perk_da]

Hello, I have set up one of the 25 2802i wireless APs with Cisco Mobility Express. Do I need to download the Cisco Mobility Express software onto the other 24 wireless APs? After I set up the one to be the controller do I need to do anything to get the other 24 to work besides plug into the switch? I am not able to find much information after downloading the software to the AP with tftp. Thank you.

[balaji.bandi]

You need - Cisco Mobility Express software AIR-AP2800-K9-ME-8-3-102-0.tar. 

follow below guide step by step :

https://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/83/user_guide/b_ME_User_Guide_83/b_ME_User_Guide_83_chapter_01000.html?referring_site=RE&pos=1&page=https://www.cisco.com/c/en/us/support/wireless/aironet-2800/model.html#task_7588F4...

If you looking HA look below :

https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-2/b_Mobility_Express_Deployment_guide/b_Mobility_Express_Deployment_guide_chapter_01011.html

[perk_da]

So I do not need to have Cisco Mobility Express software on the other 24? They can be set up as CAPWAPs?

[balaji.bandi]

You need only one controller (if HA 2 )

,. AP join Controller as normal.