Disable / modify interface monitoring of WLC in Prime Infrastructure

[luke_r_godwin]

Things in play:

Cisco Prime Infrastructure Build 3.1.0.0.132

WLC 5505 8.3.141.0

Error Message:

a critical alert advising that interface 'Port 2' is down.

Problem:

This interface is always down and in fact was never used.

What steps do I need to take to tell Prime that 'Port 2' is supposed to be down?

I have tried re-running the sync operation, then also tried deleting the WLC and re-adding it.

[marce1000 · Accepted solution]

 - You can disable the port on the WLC with : config port adminmode 2 disable (you will then no longer receive those messages on Prime).

    M.