http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_network_assistant/version6/relnotes/ol32368.html

mohdasqar · ‎07-25-2017

Does Cisco Network Assistance 6.3 support HTTPS..??
in switch side; I have disable http server with : no ip http server and
enable https with : ip http secure-server

now the switch does not get connected in CNA after enabling https..

How to make Switch connect to CNA after enabling HTTPS..??

marce1000 · ‎07-25-2017

ref :

http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_network_assistant/version6/relnotes/ol32368.html

Network Assistant now supports connecting to a device through HTTPS using TLS protocol. Earlier, Network Assistant could not connect to devices (TLS supported IOS) through HTTPS (CSCvb89695).
Network Assistant connects TLS enabled devices through HTTPS protocol only using Windows build. This feature is not enabled on Mac build.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Report Inappropriate Content · ‎07-27-2017

me too.

i have a same problem.