i want to use EEM to detector policy-map class traffic rate, if class traffic is more than a number, trigger syslog message.
below is my EEm script on ASR1002 ( asr1000rp1-adventerprisek9.02.04.02.122-33.XND2.bin)
event manager applet Rate-limit
event snmp oid ".1.3.6.1.4.1.9.9.166.1.15.1.1.10.50.196608" get-type exact entry-op gt entry-val "100" poll-interval 10
action 1.0 syslog msg "policy Rate-limit"
but i did not see anything showing on syslog. from debug, i got below error msg :
Jun 1 02:21:49.160 GMT: fh_fd_snmp_process_async
Jun 1 02:21:49.160 GMT: fh_fd_snmp_process_poll_timer: re=0x3D144824, timer_type=POLL
Jun 1 02:21:49.160 GMT: fh_fd_snmp_process_poll_timer: OID unavailable, value check skipped
Jun 1 02:21:49.160 GMT: fh_fd_snmp_start_poll_timer: start_t=10000
but i could get number from snmpwalk command :
xchen-mac:~ xchen$ snmpwalk -v 2c -c <string> -m ALL stde1002a .1.3.6.1.4.1.9.9.166.1.15.1.1.10.50.196608
SNMPv2-SMI::enterprises.9.9.166.1.15.1.1.10.50.196608 = Counter64: 112938
please help me where is wrong ?
