EEMScript: Need to invoke after an event at a specific time
I need to somehow if possible create an applet that will run at a specific time once an event has occured.
If my router Serial goes down, I want the router to switch over to the Secondary Router (HSRP) and have the Primary router change it's HSRP Standby 1 priority from 110 to 95. This way, the Secondary will remain active even if the Primary Serial comes back up (Have a problem with them bouncing).
Using a Test Router, I substituted L2 for my Serial:
event manager applet L2_Down
event syslog pattern "LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback2, changed state to down"
action 4.0 syslog msg " Int FE0/1 Priority restored to normal"
What I am looking for is somehow to trigger off both events:
L2 state to UP, and do not invoke until Sunday 2 am.
Using CRON, the router will invoke the applet every Sunday at 2am. If my circuit is still down, then the router will switch over (HSRP should kick back, but the L2_Down applet won't run.. so I am in the original problem with a bouncing circuit.
Listen: https://smarturl.it/CCRS8E37Follow us: twitter.com/ciscochampionSometimes, situations require temporary fixes. Sometimes, the network becomes an afterthought in overall office design and planning. In either situation, it may require netw...
In this special edition of the Insider Series, we hear from Cisco partners who have taken steps to be more eco-friendly and sustainable. We hear what inspires ASHRAE, Southwire, Igor, and NTT to create a workplace that is centered around people and how th...
We know that the Type-1 LSA describes the link type connected to the router, the neighbor router and the subnet number.In this topology, assume we dont have a Type-2 LSA, so each router will create its own Type-1 LSA, the Type-1 LSA will describe the neig...
Here are some commonly asked questions and answers to help with your adoption of Cisco DNA Center Wireless. Subscribe to this post to stay up-to-date with the latest Q&A and recommended Ask the Experts (ATXs) sessions to attend.
Q. I have a Cisco Appl...
Why IETF changed and inverted OSPF Type-7 LSA VS Type-5 LSA election In RFC 3101 compared to OLD RFC 1587?Many people learns that the Type-7 LSA and Type-5 election (ON Versus OE routes) depends on RFC 3101 for NSSA published in 2003 and RFC 1587 for NSSA...