Hello Everyone,
I am implementing Netflow Scrutinizer in our network and their support team told me enable port number SNMP-161. I am enabling this on 4500 and Nexus 7000 series. Can any one please advice how can I enable this. Below is existing SNMP configuration.
Nexus 7000
Nexus#
80 permit udp 10.1.32.1/32 eq snmp 10.3.32.0/24
90 permit udp 10.1.32.1/32 eq snmptrap 10.3.32.0/24
20 permit udp 10.3.32.0/24 10.1.32.1/32 eq snmp
30 permit udp 10.3.32.0/24 10.1.32.1/32 eq snmptrap
snmp-server contact security@company.com
snmp-server location Wallingford, CT - BD11
snmp-server source-interface trap Vlan208
snmp-server user admin network-admin auth md5 0xf28da5a5bf17fd08789ef9b8c7ee5b2f
priv 0xf28da5a5bf17fd08789ef9b8c7ee5b2f localizedkey
snmp-server user jmorales network-admin auth md5 0xba9b841f36ea15802cb78e8a050a5
bad priv 0xba9b841f36ea15802cb78e8a050a5bad localizedkey
snmp-server host 10.1.0.165 traps version 2c CINjks236
snmp-server enable traps callhome event-notify
snmp-server enable traps callhome smtp-send-fail
snmp-server enable traps config ccmCLIRunningConfigChanged
snmp-server enable traps link cisco-
4500
snmp-server community CINjks236 RO
snmp-server trap-source Vlan208
snmp-server location Wallingford, CT-BD11
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps ipmulticast
snmp-server enable traps bridge newroot topologychange
snmp-server enable traps stpx inconsistency root-inconsistency loop-inconsistency
snmp-server host 10.1.0.165 ipswitch-company
snmp ifmib ifindex persist
