04-13-2009 01:51 PM
we have few servers attached to Cisco load balancer. I have tried to find this server information on UT but nothing.actually CiscoWorks seen our load balancer as end devices. is there anyways to track for devices attached to load balancer??? thank in Advance.
04-13-2009 03:20 PM
No. Servers would need to be directly connected to Cisco switches which are supported by Campus Manager. The SLB device could still be handling the load balancing from a layer 3+ standpoint, but UT only knows how to collect MAC tables from layer 2/3 switches.
04-14-2009 06:01 AM
ok,Thanks.
04-16-2009 10:36 AM
HI J. ok I have another issue related to end host discovery.I have attached one example. for the server attached to this switch-A.but not discover by UT. when I run sh mac-address-table on the switch I have found this server mac-address, also when I have run sh ip-arp to the mls switch which is the switch-A attached too.
I have found the ip-address also for this server.I am really confused and we can't get any information to 50 server.
This server not attached to any load balancer.
04-16-2009 10:40 AM
Start a new thread for this new issue.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide