entPhysicalIndex on 4506

[m.ghazarian]

Is this MIB supported on 4506 switches? I cannot poll OID .1.3.6.1.2.1.47.1.1.1.1.1. However I can obtain information on ...47.1.1.1.1.2 onwards. Thanks in advance for your help.

mike

[steve.busby]

This link shows the OID as "not-accessible".

http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=en&translate=Translate&objectInput=entPhysicalIndex

And this link doesn't list any Cat 450X switch images having this OID.

http://tools.cisco.com/Support/SNMP/do/MIBSupport.do?local=en&step=3&mibId=250

HTH

Steve