Hi,
I have a Nexus Switch with WAN Links in different VRFs and corresponding LANs in respective VRF.
I need to configure a ERSPAN with one of the WAN links as source and ERSPAN destination connected to same switch.
My ERSPAN config on switch is as follows
monitor session 1 type erspan-source
erspan-id 1
vrf default
destination ip 10.8.8.2
header-type 3
source interface Ethernet1/1 both
no shut
interface Ethernet1/25
description MCX1-ERSPAN-Destn
no switchport
ip address 10.8.8.1/24
no shutdown
monitor erspan origin ip-address 3.3.3.3 global
monitor erspan granularity ns
int loopback 10
ip address 3.3.3.3/32
But I am not able to see any packets being captured on my ERSPAN destination which is running wireshark.
Kindy let me know whether my configuration requires any modification. Attaching diagram for your reference,
