Hello! I have a question about gre tunnel. So i have this network, whats picture i uploaded here. So the gre tunnel is between 'R2' and 'KV'. With the help of ACL-s, i want to deny all the packets coming in from private networks on 'HATAR'. But when i do that, i can't ping from the top left to the bottom right. How can direct traffic on gre tunnel? I configured the tunnels: R2:
int tunnel 5 ip address 192.168.140.1 255.255.255.252 tunnel source g0/0/1 tunnel destination 188.8.131.52 tunnel mode gre ip
ip address 192.168.140.2 255.255.255.252 tunnel source g0/0/0 tunnel destination 184.108.40.206 tunnel mode gre ip
i also have configured ospf protocol for the full network, and i got the tunnels' network in the process
So ACL: I want to deny all private network addresses to come in on 'HATAR' and i want to direct them to the gre tunnel but if i make an extended acl and deny all private network addresses on 'HATAR', the traffic don't go through the tunnel here is my packet tracer file: https://www.mediafire.com/file/8keiv6cc68is068/topology.pkt/file
anyway as I mention, you need static route toward tunnel, what you concern here is destination not source. only config static route for destination (traffic must pass through tunnel ) and that it. traffic will pass through tunnel.