Hello all,
I am still learning the ropes of networking and need some help with configuring a management VLAN for a router on a stick inter-vlan configuration for remote management
Current config in the below picture:
I have created a management VLAN on the switch and have assigned a free port as an access port associated with the vlan. Have set an IP address to the management vlan and set the default gateway to the 0/1 interface on the router which is configured as within the management subnet
other subnets on various other vlans are set on interface 0/1.10, 20,30,40,50 on the router with dot1q
I have set a dedicated /29 subnet for management
Any help would be greatly appreciated
thanks,
Matt
